Kalorik USK DG 16271 manual Programmation Of The Appliance

Fax +32 2 359 95 50

￿

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change the page numbering. Keep the language integrity.

•Once the steaming time is over, the appliance comes back directly to “holding” mode. Time & are displayed and a green pilot light goes on. At the end of the steaming time, the holding mode keeps the food warm (every 8 minutes the food is warmed for two minutes)

•Press “0/I” button to stop steaming and return back to clock mode.

PROGRAMMATION OF THE APPLIANCE

Press the “PROG” button. is displayed. Press “+” or “-” to set the moment when you want your appliance to start.

Caution: this setting determines at what time you want your appliance to start. For example, it is 6 PM, you want your appliance to start at 7 pm, you have to set the timer at 7:00 PM. Mind the indication PM for the afternoon settings, there is no indication for “AM” settings.

Each press increases or decreases the beginning of steaming time by 10 minutes. You can set your appliance up to 24 hours in advance.

Press once again the “PROG” button. is displayed. You can set the steaming time by pressing on the “+” or “-” button. Each press on the “+” or “-” button increases or decreases the steaming time by five minutes. Press once again on “PROG”. Time and “PROG” are displayed. The timer is then set (NOTE : if you want to cancel the programmation, press on “PROG” one more time, and the “PROG” symbol on the display will go out.).

Now your appliance is in “programmation” mode. Once the set hour has come, you hear a beep and a red pilot light goes on. The appliance starts to steam according to your settings. If you want to cancel the “programmation” during steaming, press the “0/I” button, the appliance shuts down and comes back to clock mode.

Once the steaming is over, the appliance comes back to “holding”

mode, the symbol is displayed and a green pilot light goes on. Every 8 minutes, the holding mode warms the food for 2 minutes after the end of cooking time.

Press “0/1” to come back to the clock mode.

Whatever the mode (steaming, programmation, holding…) the appliance stops automatically once all the water has run out.

￿

Back cover page (last page)

Assembly page 7/12