Kambrook Recommends Safety First
IMPORTANT: Please retain your instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Important Safeguards For Your Kambrook Power Drive Blender
•Carefully read all instructions before operating the Kambrook Power Drive Blender for the first time and save for future reference.
•Remove and safely discard any packaging material and promotional labels before using the blender for the first time.
•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
•Do not place the blender near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances. Vibration during operation may cause the appliance to move.
•Do not use the blender on a sink drain board.
•Do not place the blender on or near a hot gas or electric burner, or where it could touch a heated oven.
•Handle the blender and attachments with care – remember the blades are
•Always ensure the blender is completely assembled before operating. The blender will not operate unless properly assembled.
•Do not use attachments other than those provided with the blender.
•Do not attempt to operate the blender by any method other than those described in this booklet.
•Always secure the blade assembly onto the blender jug before attaching to the motor base.
•Ensure the Speed Selection dial is in the ‘OFF’ position and the blender is switched off at the power outlet and the power cord is unplugged before attaching the blender jug.
•Always operate the blender with the blender jug lid in position.
•Keep fingers, hands, knives and other utensils away from moving blades.
•Do not place hands or fingers into the blender jug unless the motor and blades have come to a complete stop. Ensure the Speed Selection dial is in the ‘OFF’ position and the appliance is switched off at the power outlet and the power cord is unplugged before removing the lid from the blender.
•Ensure the motor and the blades have completely stopped before disassembling. Ensure the Speed Selection Dial is in the ‘OFF’ position and the appliance is switched off at the power outlet and the power cord is unplugged from the power
4
