Using Your Blender
Before First Use
Before using your Kambrook Blender for the first time, remove all packaging material and promotional labels. Ensure the appliance is switched off at the power outlet and power cord is unplugged.
Wash the lid, inner cap and blender jug in warm soapy water with a soft cloth. Rinse and dry thoroughly (refer to care and cleaning instructions).
The motor base can be wiped with a damp cloth. Dry thoroughly.
Assembling/Operating Your Kambrook Blender
1.Place the power cord through the cord slot and place the motor base on a flat, dry surface. Ensure that the blender is switched off at the power outlet and the power plug is unplugged from the power outlet.
2.Place the blender jug onto the motor base. Ensure that the blender jug is securely positioned.
3.Add food or liquid to the blender jug. Place the lid on the blender, and push down to seal. Insert the inner cap into the hole of the blender jug lid.
4.Plug the power cord into a 230V or 240V power outlet and switch on at the power point.
5.Turn the speed control dial clockwise for the speeds Low and High setting and counterclockwise for Pulse Setting. The speed can be changed at any time during the blending process. Ideally, start blending on ‘LOW’ speed and then increase to a ‘HIGH’ speed if necessary to blend until desired
consistency is reached. For ingredients that require short burst of power, use the pulse speed. This is ideal for thick liquids, ice or nuts.
6.To stop the blending at any time, turn the speed control dial to ‘OFF’.
7.After use, ensure the blender is switched off by turning the speed control dial to the ‘OFF’ position, then switch off at the power outlet and remove the power cord. Allow the blender to cool before storing.
NOTE: During the blending process, ingredients may stick to the sides of the blender jug. To push the food back on the blades, turn the speed control dial to ‘OFF’ and switch the power off at the power outlet and remove the power cord. Remove the lid and use a plastic spatula to scrape down the sides of the
jug. Replace lid before recommencing blending.
NOTE: If the blades become stuck, immediately select the speed control dial to ‘OFF’ and switch the power off at the power outlet and remove the power cord. Remove the jug from the blender base and remove the lid. Use a plastic spatula to dislodge the food or liquid from the blades. Replace lid before recommencing blending.
7
