2Insert the end of the straightened paper clip into the hole next to the slot that contains the card, and press gently but firmly until the card is ejected.
If you can’t eject a card, insert the end of a straightened paper clip into the hole next to the slot. This hole is for the upper slot.
This hole is for the lower slot.
3 Pull the card out of the slot.
Using a PC Card modem
When you are using a PC Card modem, make sure you do the following:
1Install the communications software you want to use.
PC Card modems work with your communications software by accessing a feature of your Macintosh PowerBook’s software called the Communications Toolbox. Your software must support the Communications Toolbox in order to use PC Card modems. If you’re not sure whether or not your communications software supports the Communications Toolbox, contact the software’s manufacturer.
See the documentation that came with your communications software for instructions on setting up a PC Card modem. Check to see if PC Card modem files for your software were included.
Using Expansion Bay Modules and PC Cards | 45 |
