8Shut down your computer.
9Start up your computer from the first system software installer disk that you made with the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to
10Click OK.
The Easy Install dialog box appears. (The dialog box that appears on your screen may look slightly different than this one.)
Disk on which system software will be installed
For a clean installation,
DO NOT click the
Install button.
If you need to install on a different disk, click this button.
11Make sure that the hard disk named in the Destination Disk box is the one on which you want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
12Hold down
The following dialog box appears.
Diagnostic Techniques | 115 |
