Kambrook KFP95 manual Insert Slot Lid Locking Tab

Assembly and Operation of Your 850W Food Processor continued

NOTE: The 850W Food Processor will not operate unless the processing bowl and lid are correctly locked into position.

Insert Slot

Lid Locking Tab

Fig. 8

✓

Fig. 9

Ensure the Speed Selection Dial is in the ‘OFF’ position. (See Fig. 9).

Insert power plug into a 230V or 240V power outlet and turn the power on.

The processor is now ready to use.

To begin processing/slicing/grating turn the speed selection dial from the ‘OFF’ position to either the LOW, MED or MAX speed, depending on your requirements. The speed can be changed at any time during

the process.

For short bursts of power, whilst processing, use the PULSE setting.

For slicing and grating – ensure that the food items you want to slice or grate are of a suitable size to be fed through the food chute.

Place the food inside the chute and push down with the ‘food pusher’.

NOTE: Never push down any foods with your hands and do not put your hands down the food chute at any time during processing.

For using the processing blade – with the ingredients inside the processor bowl, start the unit on low speed moving to max if necessary. Before commencing ensure that the ‘food pusher’ is in place to avoid splashing from the food chute. Ingredients can be added through the food chute whilst processing.

If ingredients stick to the sides of

the processor bowl during processing, turn the Speed Selection Dial to

the ‘OFF’ position, switch off at the power outlet, remove lid and then push the food back onto the blades using the plastic spatula to scrape down the sides of the bowl. Then recommence processing.

NOTE: Do not over fill the processor bowl past the MAX line for solids and past the 750ml mark for liquids.

When processing is complete, turn to the ‘OFF’ position. Wait until the blades have stopped rotating before removing the lid, blades or processor bowl.

12