Kambrook KP500 manual Kambrook and Safety

Models: KP500

1 16
Download 16 pages 51.33 Kb
Page 2
Image 2

Kambrook and Safety

Congratulations on your purchase of a new Kambrook Compact Sandwich Press.

At Kambrook we believe that the safe performance of our products is the first priority in any consumer purchase so that you, our valued customer, can confidently use and trust our product.

We ask that any electrical appliance that you use, be operated in a sensible fashion with due care and attention placed on the following operating instructions.

READ THESE INSTRUCTIONS BEFORE OPERATING AND SAVE FOR FUTURE REFERENCE.

This appliance is for household use only. Do not use this appliance for other than its intended use. Do not use outdoors.

This appliance is not intended for use by young children or infirm persons without supervision.

Do not leave the appliance unattended when in use.Young children should be supervised to ensure that they do not play with the appliance.

Do not touch hot surfaces. Use handle.

Always use the appliance on a dry, level surface.

Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven.

When using this appliance, provide adequate air space above and on all sides for air circulation.

On surfaces where heat may cause a problem, an insulating mat is recommended.

Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.

DO NOT IMMERSE appliance, power cord or base in water or any other liquid.

Always turn off at the power point and remove cord before attempting to move the appliance, when the appliance is not in use or before cleaning.

Do not use harsh abrasives, caustic cleaners or oven cleaners when cleaning this appliance.

Any maintenance other than cleaning should be preformed at an authorised Kambrook Service Centre.

The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

Regularly inspect the supply cord, plug and actual appliance for damage. If found damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest Kambrook authorised service centre for examination, replacement or repair.

2

Page 2
Image 2
Kambrook KP500 manual Kambrook and Safety