Kambrook KP500 manual Before Use

Before Use

Remove any promotional labels and/or packaging materials from the Sandwich Press before use.

Check that the cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth.

Place on a flat, level surface. Slide the storage clip on the left hand side of the Sandwich Press handle towards you for the open position. Ensure the Sandwich Press is in the closed position for preheating.

1.Insert the plug into a 230/240V power point and turn the power on.The red power ‘ON’ light will illuminate.

2.Allow the Compact Sandwich Press to preheat in the closed position until the green ‘READY’ light illuminates.

3.During this time, prepare the sandwich and place it onto the bottom cooking plate. Always place sandwich towards the rear of the bottom cooking plate.

4.Close the top cooking plate which has a floating hinge that is designed to evenly press down on the sandwich (see fig 1)

Fig 1

Note:The storage clip should not be used to clamp down the top plate when sandwiches are in the

Compact Sandwich Press.The weight of the top cooking plate will gradually press down the sandwich during the cooking process..

5.Toasting should take approximately 5-8 minutes. However exact toasting time will be a matter of taste. It will also depend on the type and thickness of the bread and fillings used.

6.When your sandwich is cooked, open the lid. Remove the sandwich with the help of a plastic spatula. Never use metal utensils as these can cause damage to the non-stick coating of the cooking plates.

Note: Always allow the Compact Sandwich Press to preheat until the green ‘Ready’ light goes out.

When using your Compact Sandwich Press for the first time you may notice a fine smoke haze.This is caused by the heating of some of the components.There is no need for concern.

4