Preparing the vacuum cleaner | For dry vacuuming: | |
for use | ! Insert the paper filter bag. | |
Note: Coarse, dry dirt can also be vacuumed up | ||
| ||
| without the paper filter bag. | |
|
Operating the vacuum cleaner
Starting work
!Undo both fasteners and take the motor housing off the dirt container.
!Take the wheels and swivel castors out of the dirt container and press them into the designated sockets. The wheels “click” into position.
!Attach the accessories bracket.
!Place the motor housing on the dirt container and close both fasteners.
Connect accessories.
!Insert the suction hose into the connection on the unit. The suction hose “clicks” into position.
!Connect the two suction tubes to each other and then to the suction hose.
!Check that the paper filter bag and the dirt container are not yet full.
!Insert the mains plug into a socket.
!Switch the unit on when you want to start work.
!The floor tool can be adjusted with your foot for vacuuming hard floors or carpets.
! Connect the floor nozzle to the suction tube.
Note: For normal use the crevice tool is connected directly to the curved handle. However, the crevice tool can also be fitted directly to the suction tubes.
English 11
