Karcher A 2701 manual Storing the vacuum cleaner, Technical Specifications, English

Checking/replacing the flat pleated filter

(Order no. 6.414-498)

Regularly check the flat pleated filter for damage. If the flat pleated filter is damaged, replace it immediately, otherwise the motor may be damaged.

!Switch the unit off and open the cover on the filter compartment.

2.

1.

!Remove the flat pleated filter and replace with a new one. Close the cover.

Checking and cleaning the accessories

!Check the nozzle, suction hose and suction tube for blockages. They can be cleaned by rinsing with water. Leave them to dry before using.

Storing the vacuum cleaner

!Switch the machine off.

!Pull out the mains cable.

Note: Pull out the mains cable by the plug. Never tug the cable.

If you have been working in wet-vacuuming mode:

!Empty the dirt container, rinse the inside if required and leave to dry.

If you have vacuumed up viscous liquids:

!Rinse the accessory.

!Place the suction tubes and accessories in the accessory bracket.

Technical Specifications

Mains connection	220–240	V
(AUS)	240	V
	1~50,60	Hz
Fuse protection (surge-proof)	10	A
Power (suction motor)
Pmax	1200	Watt
Pnom	1000	Watt
Air flow rate	68	l/s
Vacuum	200	mbar
Capacity	18	l
Max. water capacity	12	l
Length	390	mm
Width	290	mm
Height	490	mm
Weight without accessories	6	kg
Nominal width, accessory	Ø 35	mm
Sound level	72	dB(A)
Class of protection	II
Cable length	5	m

English 13