Burst disc
If the working pressure exceeds the max. permissible overpressure by approx. 10%, the burst disc will be destroyed and the wa- ter will circulate inside the appliance with- out pressure. High pressure operation no longer possible.
Pressure switch
The pressure switch switches off the appli- ance if the minimum prepressure is not reached.
High pressure sensor
The pressure sensor monitors the pressure buildup in the high pressure system. If the pressure sensor detects an exceedingly rapid pressure decrease, as might be the case with leaks or a burst hose, as well as if the working pressure is exceeded, the ap- pliance will shut off.
Warning and instructive signs
Danger
Risk of injury on account of electric shock!
Warning
Risk of burns on account of hot surfaces!
Warning
Danger of crushing. Do not remove the cover while the appliance is running.
Do not reach near the cooling fan and the V- belt while the motor is running.
ÎRetighten the wheel bolts and the wheel nuts after driving 50 km to a torque of 100 Nm.
ÎRepeat the check af- ter 500 km have been driven and after 50 operating hours.
ÎRepeat the safety checks at regular in- tervals.
ÎHave the brake sys- tem and the lighting system checked reg- ularly by an author- ised dealer workshop.
Keep the warning and instructive signs on the appliance clean.
Replace damaged or missing warning and instructive signs with new ones.
Furthermore, the personnel must partici- pate in a Kärcher safety seminar.
Function
The high pressure pump is driven by an in- termediate gear by a diesel motor.
When the jet operation is interrupted, an electric signal will switch the system from hand spray gun to pressureless water cir- culation.
The preset operating pressure is regulated via the motor speed.
Environmental protection
Please arrange for the proper disposal of the old appliances
Old appliances contain valuable materials that can be recycled; these should be sent for recycling. Batteries, oil, and similar sub- stances must not enter the environment.
Please dispose of your old appliances us- ing appropriate collection systems.
Please make sure that engine and gear oil, diesel and antifreeze
do not enter the environment. Protect the ground and dispose of used oil as well as fuel and antifreeze in an environmentally- clean manner.
Please do not release mineral oil con- taining wastewater
into the soil, surface waters or sewer sys- tems.
Notes about the ingredients (REACH) You will find current information about the ingredients at: http://www.karcher.de/de/unternehmen/ umweltschutz/REACH.htm
Proper use
Use this appliance only as directed in these operating instructions.
–The appliance is used to clean objects by means of a high pressure water jet with cold water without the use of deter- gents.
–The appliance may only be equipped with original accessories and spare parts.
–The appliance is not suited for the use in potentially explosive environments.
–The appliance is not suitable to be used simultaneously with multiple spray units.
–The fresh water supply must meet the following requirements:
max. temperature | 60 °C |
pH value | 6,5...12 |
Total hardness | 3...30 °dH |
max. iron | 0.2 mg/l Fe |
max. manganese | 0.05 mg/l Mn |
max. chloride | 100 mg/l Cl |
max. organic substances | 12 mg/l |
| KMnO4 use |
max. sulphate | 100 mg/l SO4 |
max. chlorine | 0,5 mg/l Cl2 |
min. dissolved oxygen | 5 mg/l O2 |
max. abrasive hazardous | 5 mg/l |
substances |
|
|
|
free of undisolved gases |
|
max. conductivity | 1000 µS/cm |
remaining values as per DIN 50930
4 | EN - 2 |
