14Spray lance with pressure regulation (Vario Power)
15Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion.
Before Startup
Illustrations on Page 2
Illustration
Mount loose parts delivered with appli- ance prior to
Illustration
Push the high pressure hose into the trigger gun until it locks audibly.
Note: Make sure the connection nipple is aligned correctly.
Check the secure connection by pulling on the high pressure hose.
Water supply
According to the applicable regula- tions, the appliance must never be used on the drinking water supply without a system separator. Use a suitable system separator manufactured by KÄRCHER; or, as an alternative, a system separator as per EN 12729 Type BA. Water flowing through a system separator is con- sidered
Caution
Always connect the system separator to the water supply, never directly to the appli- ance!
Note: Impurities in the water can damage the
Water supply from mains
Observe regulations of water supplier.
For connection values, see type plate/tech- nical data.
6English
Use a
Push the water supply hose onto the coupling unit, then connect it to the wa- ter supply.
How to draw water from a bucket when using a KÄRCHER Pressure Cleaner
KÄRCHER recommends using the suction hose accessory (sold separately) Order no.
STEP 1:
Connect the suction hose to the water inlet on the pressure cleaner and drop the other end into a bucket.
Tip: If you are not using this accessory, coil a hose into the bucket and ensure that you only use a standard hose clamp to connect to the pressure washer.
CLICK FITTINGS MUST NOT BE USED!
STEP 2:
Fill up your bucket with water.
STEP 3:
Connect the KÄRCHER power cord to an electricity source and turn on at pow- erpoint. Make sure the high pressure nozzle is not connected and turn the unit on at the ON/OFF switch. Press the