Kathrein CAP 600 manual Manual Correction

ALIGNMENT (SATELLITE SEARCH)

MANUAL CORRECTION

At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for you to manually correct the setting (not normally required). It is also possible to manually correct the fine tuning.

Press the button to return to the main menu. By using the buttons and the button you can call up sub-menus (“Settings”, “Antenna Configuration”).

You can correct the inclination and horizontal angle of the antenna using the “Elevation” and “Azimuth direction” settings. To do this press the  buttons or enter a numeric value using the numeric keys

and confirm with  button. Check your settings by referring to the “Signal-Strength” and “Signal-Quality” bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.

The new co-ordinates are not assigned to the satellite until you have saved the satellite position when exiting the “Antenna Configuration” menu!

When you have performed the correction, press the  button to exit the menu. You will be asked whether you wish to save the changes.

Press one of the  buttons (“Yes, save the changes” or “No, don’t save changes”) and confirm by pressing the  button.

48