Features
31
The UFD 420 receiver is equipped with the following features:
• 2 tuners for simultaneous operation of the TV set and video recorder with differ-
ent programmes
• 250 programme channel memory
• Satellite input frequency range from 920 MHz to 2150 MHz
• Freely selectable oscillator frequencies - therefore suitable for all feed systems
• Radio button
• 4 event, 1-year programmable timer, with daily and
weekly repeated switch-on
• Mains switch with mains isolation
• Power failure protection for date and time by lithium battery
• Stereo / Dual tone switchover
• On-screen display (OSD) 3 languages (German, English and French)
• 22 kHz control signal, programmable
• DiSEqC 1.1 and tone-burst control signal
• LNB supply voltage can be turned off
• Connecting socket for data copying function
(read-in and read-out of programme data with the “Copy Programmer“)
• Connector available for URS 200 external infrared sensor
• Sort- (insert), swap- and copy function for programme slot
• Audio frequency range 5.0 MHz to 8.8 MHz
• Sound muting
• Volume control and also controls for balance, tone and stereo width
• Dynamic noise reduction (DNR) – Wegener Panda
• 3 Scart sockets for TV-, VCR- and decoder connection
• PLL modulator
• Additional audio outputs via Cinch sockets
• Standby power consumption ≤ 2 watts
• Last-status memory