Kathrein UFS 650si, UFS 650sw First Installation single-cable system manual

FIRST INSTALLATION: single-cable system (manual)

Selection “EXR 552”

When the “EXR 552” single-cable switching matrix is being used, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of two transmission channels are available (1400 and 1516 MHz).

Test connection

When you have set a free transmission channel, press the buttons to switch to the “Test connection”

selection field, then press the button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Confirm this display with the  button. Then press the

button. You will be asked whether you wish to save the changes. Use the buttons to select “Yes, save changes” and confirm by pressing the  button. Now press the $(green) button.

The receiver will automatically display the menu for the channel search. Continue with the section (Execute channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings and if necessary call for expert help.

24