SETTINGS
DATE AND TIME
Local time offset
Use the buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour).
Use the buttons to switch to the “Automatic clock change” field.
Automatic clock change
Use the buttons to select whether the receiver should automatically change over to and from summer and winter time. If “On” is selected, the receiver automatically sets itself to the right time. If “Off” is
selected, the field for manual selection of summer and winter time is displayed below. The buttons are also used to perform the setting.
Press the button to exit the menu again.
COMMON INTERFACE
See “Common Interface” section
ANTENNA CONFIGURATION
See “First Installation” section, pages 15ff
60
