Kathrein UFS 650si, UFS 650sw manual Option Selection, Error Signalling, Channel List TV/RADIO

ON-SCREEN DISPLAYS (OSD)

Select the channel using the buttons . You can also however select the sub-channels of a portal channel directly using the buttons, without having previously pressed the %(yellow) button.

OPTION SELECTION

Press the % (yellow) button once (twice for portal channels) to view further audio selection options, if these are transmitted by the channel provider. Use

the  buttons to scroll through the available selection options. Press the % (yellow) button again, or press the button to exit this display again.

ERROR SIGNALLING

“Weak or no signal” indicates that an error has occurred in the reception system or in the receiver settings, or that the transponder is not transmitting.

Check the Sat IF connection and the LNB configuration. If you have changed settings, compare them against the basic settings (provided you had made a note of them as suggested).

CHANNEL LIST – TV/RADIO

Also pay attention to the bars at the bottom of the on-screen display! These provide information on what to do next.

Presschannelthelist. button to access the

When you open this list the channel list selection / sort order is displayed from where you selected the last channel.

At the top left you will see the selected channel list (TV Channel or Radio Channel) displayed. Press the &(blue) button to switch between the TV and radio channel lists.

32