Kawai CA 111 manual ‘ Changing the Metronome Time Signature, ‘ Adjusting the Metronome Volume

Page

17

‘CHANGING THE METRONOME TIME SIGNATURE

…Step 3

By default, the metronome will produce a clicking sound at a constant volume - this is a 1-beat or 1/4 time signature. It is also possible to select alternative time signatures when appropriate. There are ten different types of metronome time signature available: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, 6/8, 7/8, 9/8 and 12/8. When selecting a time signature other than 1/4, a bell sound will be heard indicating the first beat of the bar.

Press and hold the Metronome button, then press the Sor TValue buttons to select the desired metronome time signature.

Metro.Beat = 1/4	The current metronome time signature will be shown in the
	LCD display until the Metronome button is released.

‘ADJUSTING THE METRONOME VOLUME

To adjust the volume of the metronome, please refer to the instructions on page 42 - 13) METRONOME VOLUME - for more information.

‘DEACTIVATING THE METRONOME

…Step 4

When metronome information is shown in the LCD display, press the Metronome button once again to deactivate the metronome.

The LED indicator for the Metronome button will turn off,

indicating that the metronome has been deactivated.

„If the metronome has been activated, but the selected sound is shown in the LCD display, first press the Metronome button to recall the metronome information, before pressing the Metronome button once again to deactivate the metronome.

„If, after the metronome has been deactivated, the Metronome button is pressed once again, the metronome will be reactivated with the previously selected tempo and time signature.

METRONOME

4