Programming
To program the timers, the unit must be in the idle mode. Press and hold the set button for approximately two seconds. The display will show “SEt”. Press T1, T2 or T3 for the cook time to be programmed. The display will show the current setting for that cook time. Use the up or down button to increment or decrement the setting. When the setting is correct, press and hold the set button again for approximately two seconds. The display will show "StO" for approximately two seconds and the timer will return to normal operation. Repeat the process as necessary for the other timers.
Operating Logic
When the timer is powered up, the display will show the time setting for the channel that was operated last and the relay output contacts will be open. To start a cycle, press the desired cook time button (T1, T2 or T3). The display will begin to countdown from the preset time setting and the relay output contacts will close. During the countdown the colon will flash at a
Pause Feature
To pause a cycle in progress, press any button. The relay output contacts will open, the display will flash, and the countdown will pause. To resume the countdown, press any button. The display will resume the normal countdown and the relay output contacts will close.
SHUTDOWN
Turn ON/OFF switch to “OFF” position.
CLEANING
PROCEDURES
A. Keating Cooking Sheets
Clean cooking sheets with a damp soft cloth after each run of product (a Turkish towel works best).
THE COOKING HEAD WILL BE HOT. USE PROPER CARE WHEN CLEANING THE COOKING SHEETS.
End of day cleaning:
Before the griddle is turned off for the day, the cooking sheets should be cleaned as described below. Wear heat resistant gloves for maximum safety during the entire cleaning procedure.
1.At the end of the day, wipe the cooking sheet in place with a damp soft cloth. Continue wiping until the surface of the cooking sheet is free of any residue.
2.Remove the cooking sheet from the cooking head. Clean the cooking head and the griddle surfaces.
3.Wash the cooking sheet with a mild detergent in warm water and dry thoroughly.
4.If needed, after the cleaning is complete, reverse the cooking sheet and reattach it to the cooking head.
B. Cooking Sheet Clips
To remove the stainless steel cooking sheet clips for cleaning, simply lift them off. They can be cleaned in a dishwasher.
C. Cooking Head
The MIRACLEAN® surface is very durable and with proper care, following the procedures below, will last many years.
1.Scrape MIRACLEAN® surface from front to back with the Keating griddle scraper with Cooking Sheets removed.
2.Clean and polish surface with Keating Klenzer on a damp soft cotton cloth. Wipe off excess Klenzer.
BECAUSE OF THE SUPERIOR MIRACLEAN® SURFACE, THE ONLY TOOLS YOU WILL EVER NEED TO CLEAN THE
NEVER SCRAPE COOKING SHEETS WITH THE SCRAPER.
NEVER USE A GRIDDLE STONE, BRICK, GRIDDLE SCREEN OR HARSH CHEMICALS TO CLEAN THE MIRACLEAN® SURFACE.
DAMAGE DONE TO THE MIRACLEAN® SURFACE BY GRIDDLE STONE, BRICK, SCREEN, OR HARSH CHEMICALS WILL VOID THE WARRANTY.
THE DAMAGE DONE TO THE MIRACLEAN® SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN® SURFACE AS IT MAY WARP THE MIRACLEAN® SURFACE.
USE ONLY KEATING SUPPLIED CLEANING TOOLS AND KLENZER.
USE ONLY A KEATING STEEL SPATULA.
NOTE: Keating Klenzer MSDS Sheet available on website, www.keatingofchicago.com
3
