Manuals / Keating Of Chicago / Kitchen Appliance / Cooktop

Keating Of Chicago 2005 V Service Diagnosis, Disconnect power before servicing, Problem, Solution

Models: 2005

1 22

Download 22 pages 5.93 Kb

Page 8

V SERVICE DIAGNOSIS

V SERVICE DIAGNOSIS

A properly adjusted Keating Top-Side™Cooker, with no load, will cycle “ON” approximately every 51/2 to 61/2 minutes. Each cycle will last 40 seconds, ensuring that the temperature setting is held within a narrow range.

A.Trouble-Shooting

The following diagnosis is only to be used as a guide to qualified service personnel. Keating recommends that you use a qualified service company.

Disconnect power before servicing.

PROBLEM			PROBABLE CAUSE				SOLUTION

POWER ON light	does	not	a.No electricity to Top-Side™Cooker.				a.Connect Top-Side™Cooker to an
come on.							approved source of power.
			b.ON/OFF switch is faulty.				b.Replace ON/OFF SWITCH

ELEMENT ON light does not			a.Connections to thermostat are loose				a.Check connections and tighten where
come on and cooking head			or thermostat is faulty.				necessary. If thermostat is faulty,
will not heat.							replace.
			b.Connections	to		thermostat	b.Check connections and tighten where
			temperature probe are loose or probe				necessary. If probe is faulty, replace it.
			is faulty.
			c.Hi-Limit has	tripped or		Hi-Limit is	c.Wait until cooking head cools down. If
			faulty. Note: Hi-Limit is self-resetting.				ELEMENT ON light will not come on
							Hi-Limit is faulty, replace it.
			d.Connections to Hi-Limit are loose or				d.Check connections and tighten where
			Hi-Limit is faulty.				necessary.
			e.Connections to contactor are loose or				e.Check connections and tighten where
			contactor is faulty.				necessary. If contactor is faulty,
							replace it.
			f. ON/OFF switch is faulty.				f. Replace ON/OFF switch.

ELEMENT ON light does not			a.ELEMENT ON light is faulty.				a.Replace ELEMENT ON light.
come on, but cooking head
does heat.

ELEMENT ON light flashes			a.Thermostat	temperature		probe or	a.Replace probe and/or wires. Use
once whenever	power	is	wires have shorted out.				conductive heat paste when installing
turned on.							new probe.

Temperature of cooking head			a.If erratic, thermostat is faulty.				a.Replace thermostat.
is erratic.

6

Image 8

Keating Of Chicago 2005 V Service Diagnosis, Disconnect power before servicing, Problem, Probable Cause, Solution

Contents

CONTENTS TOP SIDE COOKER SERIESIMPROPER INSTALLATION BEFORE OBTAINING ACCESS TODO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORSII INSTALLATION I INTRODUCTIONSTANDARD FEATURES STANDARD ACCESSORIESIII OPERATING COOKING HEIGHT ADJUSTMENTDIGITAL TIMER PROGRAMMING FOR AUTO-LIFTHEADS ONLY T1 T2 T3CLEANING PROCEDURES Pause FeatureEnd of day cleaning SHUTDOWNPREVENTIVE MAINTENANCE IV MAINTENANCEWARRANTY REPAIRS INSTALLING A COOKING SEET TIPS ON PROPER HANDLING AND USE OF COOKING SHEETSLEVELING OF COOKING HEADS REMOVAL OF COOKING HEADV SERVICE DIAGNOSIS Disconnect power before servicingPROBLEM SOLUTIONTROUBLESHOOTING THE THERMOSTAT Top-Side Cooker Probe ChartVI EXPLODED VIEW & PARTS LIST ORDERING PARTSWARNING AND OPERATING PLATES MANUAL LIFT TOP-SIDE COOKERTOP-SIDE COOKING HEAD - MANUAL & AUTO-LIFT PARTDESCRIPTION NUMBERAUTO-LIFT TOP-SIDE COOKER 9.Reinstall the switch cover Top View with Cover Removed Front ViewTOP-SIDE COOKER CONTROL PANEL 15 To Top-SideHeadWIRING DIAGRAM WITH DIGITAL TIMER - 120VAC SUPPLYWIRING DIAGRAM WITH DIGITAL TIMER - 240VAC SUPPLYVII WIRING DIAGRAM TOP-SIDE COOKER MANUAL LIFT WIRING DIAGRAMNOTE ANGLED TERMINALS OF SWITCH ARE ALWAYS ON/OFF SWITCHCOOKER AUTO-LIFTWIRING DIAGRAM FOR GAS GRIDDLE WIRE COLOR CODESTOP-SIDE COMPONENT CODESPage Page Page KEATING OF CHICAGO, INC SERVICE INFORMATION“Serving Those Who Serve The Very Best”