Do not hack, chop or hit the surface. You will dent the steel plate under the trivalent chrome. It is even possible to hack two nicks close together and actually tear the MIRACLEAN® surface as the chromium will not stretch. Below is a sketch showing a side view of a cooking head and how the surface can be damaged. Proper use of the utensils supplied with your MIRACLEAN® Griddle will prevent surface damage.
Surface Damage
IV MAINTENANCE
WARRANTY REPAIRS
Keating’s warranty begins with the date of installation. In the event your Keating
NOTE: The cooking sheets are not covered under warranty.
PREVENTIVE
MAINTENANCE
Preventive maintenance should be done in daily, weekly, monthly and yearly intervals as necessary. Following preventive maintenance procedures will help keep your
TIME |
| OPERATOR/OWNER | SECTION | ||
FRAME |
| ||||
|
|
|
|
| |
|
|
|
| ||
At Least | • | Clean all cooking sheets. | III | ||
Daily | • | Clean MIRACLEAN | ® | Griddle |
|
|
|
| |||
|
| surface. |
|
|
|
|
|
|
|
| |
At Least | • | Clean all surfaces of |
| III | |
Weekly* |
|
|
|
| |
|
|
|
| ||
Monthly* | • | Verify thermostat settings. | IV & V | ||
| • | Review cooking procedures. | III | ||
|
| ||||
| • | Check Cooking Sheets |
| ||
|
| (Replace if necessary). |
| ||
|
|
|
| ||
At Least |
| QUALIFIED SERVICE | IV & V | ||
Yearly* |
| PERSONNEL ONLY |
| ||
| • | Thoroughly check and test |
| ||
|
|
|
|
| |
| • | Calibrate controls. |
|
|
|
|
|
|
|
|
|
*High production facilities should be checked more often. Contact the factory or a local service company to perform maintenance and repairs.
Proper care should be taken to fully clean the Top- Side™ Cooker on a regular basis. The control panel should be cleaned of any greasy residue with a damp cotton cloth. Remove any residue from the ON/OFF switch and the thermostat. Wipe down the cabinet, sides and back on a regular basis.
4
