Digital Timer Programming | Keating Of Chicago SERIES 2006 guide

STEP 2 PRESS all 3 buttons in sequence: left-center- right. The BEEPER will BEEP. If BEEPER does not BEEP, the timer is defective. STOP TESTING. Reset procedure is completed when 1:00 appears on the digital display.

1:00

DIGITAL TIMER (PART # 030834)

PROGRAMMING

To program the timers, the unit must be in the idle mode. Press and hold the set but- ton for approximately two seconds. The display will show “SEt”. Press the button for the channel to be programmed. The

display will show the current setting for that channel. Use the up or down button to increment or decrement the setting. When the setting is correct, press and hold the set button again for approximately two seconds. The display will show "StO" for approximately two sec- onds and the timer will return to normal operation. Repeat the process as necessary for the other timers.

OPERATING LOGIC

When the timer is powered up, the display will show the time setting for the channel that was operated last and the relay output contacts will be open. To start a cycle, press the desired channel button (1-3). The display will begin to countdown from the preset time setting and the relay output contacts will close. During the countdown the colon will flash at a one-second rate. When the countdown has reached "00:00" the relay output contacts will open, the display will flash, and the audible alarm will sound. To cancel the audible alarm, press any button.

PAUSE FEATURE

To pause a cycle in progress, press any button. The relay output contacts will open, the display will flash, and the countdown will pause. To resume the countdown, press any button. The display will resume the normal countdown and the relay output contacts will close.

CANCELING A CYCLE

To cancel a cycle in progress press and hold any button for approximately two seconds. The relay output contacts will open and the display will show the time setting for the channel last used.

DRAINING

ALWAYS SHUT THE FRYER OFF COMPLETELY BEFORE DRAINING. THE FRYER SHOULD BE DRAINED ONLY UNDER THE SUPERVISION OF PROPERLY TRAINED PERSONNEL. A DRAIN PIPE AND COVERED CONTAINER SUITABLE FOR USE WITH HOT OIL SHOULD BE USED TO ENSURE THE SAFETY OF THE OPERATOR.

1.Operator should be outfitted with proper attire including:

–Oil and heat resistant gloves –Oil and heat resistant apron –Safety goggles

–Oil and heat resistant footwear

Figure 3-2

Side view of Safe & Easy Filter

2.Turn off the fryer and open the door.

3.Put suitable container under drain valve (for Safe & Easy models, slide filter onto rails inside of fryer or filter cabinet).

4.• Front Drain: Drain oil from fryer by slowly turning handle. The drain will be completely open after 1/4 turn.

• Rear Drain: Pull black knob forward slowly.

5.After fryer drains, close the drain valve.

6.Filtering may be done at this step - refer to filter manual.

CLEANING AND BOIL-OUT

When cleaning and boiling out your fryer use Keating Sea Powder and Keating Klenzer to keep your fryer in top condition. Keating Sea Powder dissolves any grease build up — even carbonized grease in fryer vessels — one of the leading causes of premature oil breakdown. Once your fryer vessel is clean, use Keating Klenzer, the finest dry stainless steel polish available, to restore your Keating Incredible Frying Machine®’s (IFM) exterior to its original luster.

SERIES 2006 specifications

The Keating of Chicago series, introduced in 2006, is a striking tribute to modern architecture and innovative design within urban environments. This furniture line, known for its sleek lines and functional form, reflects the spirit of Chicago’s rich architectural history while embracing contemporary aesthetics.

One of the key features of the Keating series is its modular design. This allows for versatility in residential and commercial spaces, enabling users to configure pieces in ways that suit their specific needs and preferences. The series includes a range of products, from sofas to coffee tables, all sharing a cohesive design language. The use of clean lines and geometric shapes promotes a sense of minimalism that appeals to modern sensibilities.

Technologically, the Keating series incorporates sustainable materials, reflecting a growing trend in furniture design focused on environmental responsibility. Many pieces are crafted from reclaimed wood, while upholstery options feature eco-friendly fabrics that are both durable and stylish. This commitment to sustainability is coupled with a focus on craftsmanship, ensuring that each piece is not only visually appealing but also built to last.

Another characteristic feature of the Keating series is its color palette and finishes. The collection often showcases neutral tones, allowing it to seamlessly integrate into various interior styles. Accents of rich colors or textures can be introduced through cushions or decorative elements, enabling individuals to personalize their spaces while retaining the series’ elegant aesthetic.

The Keating series also emphasizes comfort without compromising style. Seating options are designed with ergonomics in mind, featuring plush cushions and supportive frames. This thoughtful approach ensures that users can enjoy both the beauty and practicality of their furniture.

In summary, the Keating of Chicago series from 2006 represents a perfect fusion of modern design principles, functional versatility, and eco-consciousness. Its modular nature, sustainable materials, and commitment to comfort make it a sought-after choice for those looking to enhance their living or working environments with sophisticated furniture that stands the test of time.

Keating Of Chicago SERIES 2006 warranty Digital Timer Programming, Operating Logic, Pause Feature

Models: SERIES 2006