Kenmore 110.4418 manual Portable Installation model Tools needed Parts supplied, Alternate Parts

INSTALLATION REQUIREMENTS

Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the washer basket.

Portable Installation (model 110.4472)

Tools needed:

Parts supplied:

•Pliers that open to 19/16''(3.95 cm)

•Utility knife

•Flashlight (optional)

Parts supplied:

OO

A

O0

oo

EF

A. Drain hose

B. Silver, double-wire hose clamp (for the bottom of the drain hose)

C. Yellow, single-wire hose clamp (for the top of the drain hose)

D. Water inlet hoses (2) E. Flat water inlet hose

washers (4)

F. Beaded tie strap

BCD

A. Flat washers for faucet adapter and fill hose

B. Silver,double-wire hose clamp (for the bottom of the drain hose)

C. Faucet adapter

D. Fill-and-drain hose

NOTE: To change a permanent installation to a portable installation, a kit is required. To order, call your local Sears store or Sears Service Center. For further information, please call

1-800-4-MY-HOME ® (1-800-469-4663). Ask for Part Number 3935674.

Permanent Installation (model 110.4418)

Tools needed:

•Pliers that open to 1%6" (3.95 cm)

•Flashlight (optional)

•Adjustable or open end wrench %6" (14 mm)

•Level

•Wood block

•Utility knife

•Measuring tape

NOTE: To change a portable installation to a permanent installation, a kit is required. To order, call your local Sears store or Sears Service Center. For further information, please call

1-800-4-MY-HOME® (1-800-469-4663). Ask for Part Number 4396746.

Alternate Parts

Your installation may require additional parts. For ordering information, call your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME ® (1-800-469-4663).

If You	Have:		You Will	Need to		Buy:
Laundry tub or			Sump pump		system		(if not already
standpipe		taller	available)
than 72" (183 cm)
1" (2.5 cm)			2" (5 cm)	diameter		to	1" (2.5 cm)
diameter			diameter	standpipe		adapter,			Part No.
standpipe			3363920
Overhead		sewer	Standard	20 gal. (76 L) 39"					(99 cm) tall
			drain tub or utility sink, sump pump and
			connectors		(available		from local
			plumbing	suppliers)
Floor	drain		Siphon break, Part Number 285320;
			additional drain hose, Part Number
			3357090	and connector				kit,
			Part Number 285442
Water	faucets		2 longer	water fill hoses:
beyond reach of			6 ft (1.8 m) Part Number					76314,
fill hoses			10 ft (3.0 m) Part Number 350008
Drain	hose too		Drain hose, Part No. 388423 and hose
short			kit, Part No. 285442

Drain hose that is Hose kit, Part No. 285442 too long

Lint clogged drain Drain protector, Part No. 367031