To use a Timed Cycle
Select a Timed Cycle.
Press MORE TIME or LESS TIME until the desired drying time is displayed. Tap MORE TIME or LESS TIME and the time will change by
NOTE: The Timed Cycle Adjust feature can be used only with Timed Cycles.
,_ 7L__
Cycle
Press TEMPERATURE until the desired temperature illuminates.
To make changes to Time, Temperature, WRINKLE GUARD ® and Cycle Signal during a Timed Cycle:
•Press STOP once.
•Adjust the Time, Temperature, WRINKLE GUARD ® and/or Cycle Signal.
5= (OPTIONAL STEP) If desired, select WRINKLE GUARD ®. For more details, see "WRINKLE GUARD®. ''
6.(OPTIONAL STEP) The Cycle Signal is preset to on. If desired, you may turn the Cycle Signal off.
7.Press and hold START for approximately 1 second until dryer starts. Be sure the door is closed.
•If you do not press Start within 5 minutes of selecting a cycle, the dryer automatically shuts off.
To pause/stop the dryer at any time
Open the door or press STOP once. To restart the dryer
Close the door. Press and hold START until dryer starts.
To end/cancel your dryer at any time
Press STOP twice or open the door.
NOTE: Drying will continue from where the cycle was interrupted if you close the door and press Start within 5 minutes. If the cycle is interrupted for more than 5 minutes, the dryer will shut off.
Select new cycle settings before restarting the dryer.
This feature allows you to lock your settings to prevent unintended use of the dryer. You can also use the control lock feature to prevent unintended cycle or option changes during dryer operation.
To enable the control lock feature:
Press and hold CYCLE SIGNAL button for 3 seconds. The CONTROLS LOCKED icon lights up, and a single beep tone is heard. To unlock, press and hold CYCLE SIGNAL button for
3 seconds. The indicator light turns off.
Properly loading your dryer can lower your utility bill and prolong the life of your garments.
Loading suggestions
•Load the dryer by the amount of space items take up, not by their weight.
•Do not overload the dryer. This causes uneven drying and wrinkling
Super Capacity | Dryers |
| |
Sturdy Work Clothes |
| ||
4 jeans |
|
| 2 sweatpants |
4 workpants |
| 2 sweatshirts | |
4 workshirts |
|
| |
Towels |
|
|
|
10 bath | towels |
| 14 washcloths |
10 hand | towels |
|
|
Mixed Load |
|
| |
3 sheets | (1 king, | 2 twin) | 9 |
4 pillowcases |
| 9 shorts | |
3 shirts |
|
| 10 handkerchiefs |
3 blouses |
|
| |
Select the correct cycle and dryness level or temperature for your load. If an Auto Cycle is running, the display shows the estimated cycle time, which is determined by your dryer automatically sensing the dryness level of your load. If a Timed Cycle is running, the display shows the exact number of minutes remaining in the cycle.
Cool Down tumbles the load without heat during the last few minutes of all cycles. Cool Down makes the loads easier to handle and reduces wrinkling. The length of the Cool Down depends on the load size and dryness level.
Drying tips
•Follow care label directions when they are available.
•If desired, add a fabric softener sheet. Follow package instructions.
•To reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is especially important for permanent press, knits, and synthetic fabrics.
•Avoid drying heavy work clothes together with lighter fabrics. This could cause overdrying of lighter fabrics and lead to increased shrinkage or wrinkling.
16
