Kenmore 116.25914, 116.25915 owner manual Dirt Sensor, In Operation, Initial Start Up

DIRT SENSOR

The dirt sensor

light system is mounted on the Power-Mate ® nozzle near the reset button.

It consists of a series of two rod lights and two green lights. The lights give you an indication of the amount of dirt particles that are passing through the sensor on its way to the dust bag.

INITIAL START UP

When the Power-Mate ° is first started, the fol- lowing light sequence occurs in a two second time frame:

t. Two reds come on.

dirt on it, dirt will be picked up by the vacuum

and the red lights might stay on.

IN OPERATION

When the Power-Mate" is being moved back and forth on the floor, the lights will change from one configuration to another as dirt is being vacuumed. As long as the rod lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning.

When the green lights stay on as the Power- Mate ® is moved back and forth over an area, the sensor is not seeing enough dirt to warrant further cleaning of that area.

NOTE: Dirt sensor lights DO NOT function in the FLOOR setting.

2.Two greens are on and will remain on until

the Power-Mate ® nozzle is placed in use. NOTE: If the nozzle is on a surface that has

The vacuum cleaner creates suction that picks up dirL Rapidly moving air carries the dirt to the dust bag through the airflow pas- sages. The dust bag lets the air pass through, while it traps the dirt.

For best cleaning results, keep the air- flow passage open. Check the starTed areas occasionally for

clogs. Unplug from outlet before checking.

Motor

Safety

Filter Exhaust

14