CANISTER CARE
For best cleaning results, the dust bag
should be changed often. The electronic
performance indicator will come on when
the bag needs to be changed or the airflow is blocked.
NOTE: See PARTS AND FEATURES for
Bag Number.
1. Unplug cord from wall outlet.
2. Remove hose from canister.
3. Pull hood release out and up, then lift canister hood.
4.Disengage cardboard tab from
red bag mount by pulling away and
lifting up.
5.Pull bag out of
the red bag mount.
6. Check the
motor safety filter and
replace, if necessary.
Mount
1.Unplug cord from wall outlet. DO NOT drip water on vacuum cleaner.
2.Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry after cleaning.
3.To reduce static electdcity and dust build- up, wipe outer surface of vacuum cleaner and attachments.
7.The red bag mount will flip forward after removing bag. This will prevent the lid from closing until a new bag is installed.
Note: DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots.
8. Rotate red bag mount down and
install bag into |
| m |
slots per |
| |
instructions |
| |
pushing down until | _ | |
the cardboard tab |
| |
locks into position |
|
|
and the holes align. Tuck the bag securely into the bag cavity so that none of it is able to be pinched by the hood.
9.Close and latch canister hood.
10.Reinstsllhose.
11.Plug cord into wall outlet.
CAUTION
NEVER REUSE A DUST BAG.Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor. Change bag more often when vacuuming these materials.
CAUTION
Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks.
15
