IbWARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter or
exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for exhaust filter number.
1.Slide latch
upward | to | __Fslter |
release | the |
|
exhaust | filter |
|
cover from slot in canister.
2. Pull out and up on filter cover to remove from canister.
3. Remove the
exhaust filter
using the recess as shown.
Filter
5.Replace the exhaust filter
cover by placing the two tabs on
the fi]ter cover into the slots on the canister and rotate into place.
4.Replace the exhaust filter
Place the new filter into the canister with the foam seal
towards the cartridge.
canister.
6.Slide latch downward to lock the exhaust filter cover into place.
POWER-MATE® CARE
Always follow all safety precautions when cleaning and servicing the
WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before ser- ;vicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
17