Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting,
Frequently check and remove hair, string and lint
TO REMOVE BELT
Disconnect power cord from electrical
outlet, and place on paper to protect the floor surface_ Place vacuum in the full
Agitator
The agitator and belt are now exposed,
Carefully remove any residue that may exist in the belt area,
Motor
Shaft
upright posiiton
Plate
Agitator
Turn the unit over so
the agitator and base
plate are facing upward.
Position hands on the agitaton If the belt is still attached to the motor shaft, there wilt be tension on the agitaton If the belt is not broken, remove it from the motor shaft before lifting the agitator°
Carefully lift the right end of the agitator and then lift the left end,
Carefully remove the end cap and washer from each end and lay them aside_ See the exploded view.
Locate the two screws and the two
g Tabs
WARNING
locking tabs which secure the base plate.
To remove the base plate, remove the two screws. Push in on the locking tabs toward the center of the vacuum
Pull the base plate away from the nozzle housing., The sides of the base plate need
to be pulled slightly outward to clear the wheels.
Personal Injury Hazard
Be careful when removing the agi- tator as the belt tension is high. Failure to do so could result in personal injury from the agitator releasing quickly and snapping away.
16
