Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand,,
Handle ,/'
Release Pedal
HANDLE MOUNTED
SOME MODELS
BODY MOUNTED
SOME MODELS
To start the vacuum cleaner, slide the ON/OFF switch from the OFF posi- tion to the ON posi- tion. To stop the vacuum cleaner, slide the ON/OFF switch to the OFF position.
Crevice
Tool
Telescoping
Dusting
Brush
Upholstery
Tool
.Stretch
Hose
Hose
Collar
To start the vacuum cleaner, put the ON/OFF switch on the top of the body in the ON position. To stop the cleaner, put the ON/OFF
switch in the OFF position°
When returning the bare floor selector to the carpet setting, use caution as the selector can move quickly to that setting due to tension created by the bell
Remove the lower end of the stretch hose from the cleaner by grasping the hose collar, twisting and pulling straight out.
NOTE: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the bag quickly. See the
TROUBLESHOOTING section°
identify each of the attachments shown above°
TO USE ATTACHMENTS
Place the bare floor selector in the bare floor setting by rotating the selector back and down to the bare floor setting See
CARPET/BARE FLOOR SELECTOR section
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.