Check primary filter frequently and clean when dirty. Remove the dust bin assembly as outlined in the DUST BiN CLEANING section and empty contents of dust bin.
Make sure dust bin is empty before filter is removed. Grasp filter screen, rotate
Before replacing the primary filter it is a good idea to clean the inside of the dust bin and lid
area.
_._ | _ IAIIgnment |
Lid_Filter
Scree/1
Grasp primary filter, rotate counter- clockwise and lift out. Clean primary filter by genfiy tapping over a trash container.
Tap on several sides to ensure best cleaning. (Rinse with water only as needed) The fitter may be cleaned by tapping it on a firm surface or by rinsing it under a faucet.
Rinse with water only, do not use detergent or soap. Allow filter to dry 24 hours
before putting it back into the dust bin. When the cleaning of the filter no longer restores vacuum suction to full power you need to replace the filter.
Rotate filter clockwise until slots lock onto
tabs in lid.
To
Tabs
Alignment
Tabs
Rotate filter screen clockwise to lock in
place.
12