FP WARNING, E! Warning, To Remove Nozzle Cover

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec-

trical shock or personal injury from cleaner suddenly starting.

Frequently check and remove hair, string and lint build-up in the brush area. If build-

up becomes excessive, follow the steps below. Should the belt become loose or

should it break, follow the Belt Removal Instructions.

Carefully remove any residue that may exist in the belt area.

I ersonal injury Hazard

Always unplug the vacuum cleaner

before cleaning the brush area as

agitator may suddenly restart. Failure to do so can result in per-

sonal injury.

Disconnect electrical supply. Press handle release pedal and rotate the handle down so the cleaner is laying flat on the floor.

To protect the floor surface, always place

paper under the nozzle any time the nozzle cover is removed.

Release the nozzle cover by rotating the nozzle cover retainers to the UNLOCK

position. Grasp back of nozzle on each side and lift up to remove it from nozzle cover.

=_:_ Nozzle Cover H

Retainers II

Nozz/e _'7"_,I _ _x,_ ll! /_ -q"_/_

Cover/--

_BAgitator

elt

Position hands on the agitator. If the belt is still attached to the agitator, there will be tension on it.

Carefully lift the right end of the agitator and then lift the left end.

Remove the worn or broken belt from the motor drive shaft.

Personal Injury Hazard

Be careful when removing the agita- tor as the belt tension is high.

Failure to do so could result in per- sonal injury from the agitator releas- ing quickly and snapping away.