Review this chart to find
!WARNING Electrical Shock Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury.
PROBLEM
Cleaner will not run.
Poor job of dirt pickup.
Dust escapes the dust bin.
Light will
not work,
POSSIBLE CAUSE
1.Unplugged at wall outlet.
2.
3.Tripped circuit breaker/blown fuse at household service panel.
. Full or clogged dust bin.
2.Broken belt.
3.Clogged hose or nozzle.
4.Hose not inserted fully.
5.Worn agitator.
6.Hole in hose.
7.Dust bin assembly improperly installed.
8.Belt not installed on motor shaft.
1.Dust bin assembly
improperly installed.
1. Burned out light bulb.
POSSIBLE SOLUTION
1.Plug in firmly. Push
2, Push
3.Reset circuit breaker or replace fuse.
1.Empty dust bin.
2.Replace belt.
3.Clean hose or nozzle area.
4.Insert hose.
5.Replace agitator.
6.Replace hose.
7.Properly install dust bin assembly.
8.Install belt on motor shaft.
1.Properly install bin.
1, Replace light bulb.
18