Kenmore 116.34722, 116.34723 owner manual Reinstall light lens by snapping into place, Light Lens

Models: 116.34723 116.34722

1 19

Page 14

Ensure ON-OFF switch is OFE

Disconnect power cord from electrical outlet.

Press handle release pedal and rotate the

handle down so the cleaner is laying flat on the floor.

Pry out light lens at slots. Remove old bulb from the socket by pulling from socket.

Replace bulb by pressing into socket. Only use a bulb rated 13 V AC-9 Watts.

Image 14

Contents

Impreso en Mexico Model, ModeloVacuum Cleaner Aspiradora Before SAVE THESE INSTRUCTIONS Do not handle plug or cleaner with wet handsATTACHMENTS Wends,l7OPERATING INSTRUCTIONS USING HANDLEUSING CORD HOOK STORING HANDLEpower cord into 120V outlet. ON position SOME MODELSSlide the adjustment lever to the correct setting SwitchE CAUTION CLEANING AREATO USE ATTACHMENTS ATTACHMENTF.! WARNING VACUUM CLEANER CARE E=! WARNINGo! CAUTION Unplug cord from wall outletTO EMPTY Empty con- Dust Bintents into a trash con- tainer DUST BINCaptures dirt and debris picked up The Lid houses the filterDust Bin from the suction motorRotate filter screen clockwise to lock in place The secondary filter screen protects the motor NOTE See Parts and Features for Filter numberDO NOT wash in the dishwasher DO NOT install damp Primary Lid Filter ScreeLight Lens Reinstall light lens by snapping into placeReturn the cleaner to the upright position fP WARNING TO REMOVE BELT/CLEAN AGITATORCover E! WARNINGTO REPLACE BELT NozzleCover\ Shaftoonooo,or PROBLEM Cleaner will not run POSSIBLE SOLUTIONPOSSIBLE CAUSE WARNING Electrical Shock Hazardiiiiiiiiiiiiiiii!ii iiiiiii!ii!iiiii!i8E /AR8 Your Home