SOME MODELS
To select a pile height setting:
Turn off cleaner. Select a pile height setting by tilting the cleaner back until front wheels are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct setting,
Models with no selector adjust automatically for varying carpet heights.
SUGGESTED PILE HEIGHT SETTINGS
You may need to raise the height to make some jobs easier, such as scatter rugs and longer pile carpets.
Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter rugs
MED: medium to long pile.
LOW: short to medium pile.
EX LOW: very low pile.
Place unit in "HIGH" when using attach- ments to prevent possible floor damage.
ATTENTION: Special care is required when vacuuming certain types of carpet or floor covering. Always check the carpet or floor covering manufacturer's recommended cleaning instructions before vacuuming.
Pile Height
Adjustment \._._ _ J LI
WARNING
Personal Injury Hazard
To avoid personal injury, DO NOT place hands or feet underneath the unit when changing height setting.
Ensure |
|
power cord into 120V outlet. ON position | Switch |
turns vacuum on. OFF position turns |
|
vacuum off. |
|
Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand.
6