Kenmore 116.34924 To Operate Suction Control Slide, Telescopic Wand with Suction Control Slide

TELESCOPIC WAND WITH SUCTION CONTROL SLIDE

Hose	1. Remove	the
c_	hose from	the

hose clip by

pulling straight out.

2.Remove the telescopic wand from its storage position.

3.Remove--Crevice

the crevice		Tool
tool from	its
storage	posi-	Telescopic
tion in the
		Wand

wand. Turn the locking ring to the

UNLOCK position.

4.Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the hose.

Lower_			Suction
Wand ---'_'_f_			Control Slide
I	"_.,,__	Wand	! _'_¢t..J
\	_<_,_.Lock/ngRing		_
	Unlock	_,_-	Upper
			Wand

Align the tabs on the extension wand with the "J" slots in the hose (as illustrated above right). Push the wand into the hose and twist to the right to lock.

To achieve maximum reach

with the attachments, add the crevice tool to the end of the

wand by inserting and H twisting slightly.

sucaon m' I IU_II II controlN J-I I Ill II

Telesc°pic///	_	/ff	_x
Crevice//	_	/_Raised
Tool //	_	_	Tab/
y

The dusting brush or the combination

brush may be attached directly to the wand or placed on the end of the crevice tool.

Dusting	Brush		Wand
(Some Models)			=
Combination _,mJ			I_
Brush	(Some	\ \	I
Models)		L.J	Brush

TO OPERATE SUCTION

CONTROL SLIDE

Telescopic Wand

When using attachments for cleaning draperies, small rugs with low pile and other delicate items, twist the suction control slide to the open position. This slide is located on the telescopic wand, close to the hose.

This will reduce suction for ease of cleaning.

Note: Return		Suction
suction	control	Control
slide to	the closed	Sfide
position	for
normal	cleaning.

! CAUTION

When using attachments, be careful not to overextend the stretch hose

when reaching.Trying to reach

beyond the hose stretch capability could cause the vacuum cleaner to

tip over.

9