![Unpluggedat wall outlet.](/images/new-backgrounds/50931/5093137x1.webp)
Review this table to find
Vacuum cleaner | 1. | Unpluggedat wall outlet. |
won't rgn, |
|
|
| 2. | Trippedcircuitbreaker/blownfuse |
|
| at householdservicepanel. |
| 3. | Thermal protectortripped. |
Plug in firmly,select the desiredset- ringon the touchcontrol.
Reset circuitbreakeror replace fuse.
Unplugvacuumcleaner allowto cool and thermalpmtactorwill reset itself.
Poor Jobof dirt pick-up.
Vacuum Cleaner picks up moveable rugs or pushes too hard.
1.Fullor cloggedd_t bag.
2.Wrong pile heightsetting.
3.Worn agitator.
4.Cloggednozzleor bag holder.
5.Cloggedhose.
6.Hole in hose.
7.Hose notinsertedfully.
9" Motorpmtactlensystemactivated. i . Dirtyfilters.
1. Wrong pileheight setting.
1.Change bag.
2.Adjustsetting.
3.Take to yournearestSears
Service Center.
4.Check CLOG REMOVAL.
5.Check for clogs.
6.Taketo your nearestSears
ServiceCenter.
7.Insert hosefufiy.
8.Check for clogs.
9.Change motorsafety filter and exhaustfilter.
1. Adjust setting.
Light won'twork. | 1. | Burnedout lightbulb. |
Agitator does not turn. | 1. | Handlein full uprightposition. |
| 2. | AgitatorOverleadtripped. |
| 3. | Thermal protectortripped. |
Performance indicator, | 1. | Full or cleggeddust beg. |
some models, is red. | 2. | Dirtyfilters. |
| 3. | Cleggedairflowpassage. |
| 4. | Certain attachmenttools. |
Air flow restricted | 1. | Attachmentuse restrictsair flow. |
with attachment use. |
|
|
Sound changes. | 2. | New carpet fuzz cloggedair path. |
Dirt Sensor, some | 1. | Dirtyopticcells. |
models, will not work. |
|
|
Difficulty adjusting pile | 1. | Vacuum cleanernot in upright |
height eattlng |
| position, |
1. Changelightbulb.
1.Move handlefrom uprightposition.
2.Reset AgitatorOverload.
3.Unplugvacuumcleaner allowto cool andthermal protectorwill reset itself.
1.Changebag.
2.Changemotorsafety filter and exhaust filter.
3.Clear clogfrom airflow passage.
4.This is normal.Lightshouldgo off when tool is removed.
1.CheckATTACHMENTS.
2.Check CLOG REMOVALand clean hose.
1.Clean opticcells.
1.Tilt vacuumcleaner to upright position.
19