=teJr.®
Dusting
Brush.
Hose
e
Tool
Wands
Identi_ each of the attachments shown above.
IbCAUTION
When using attachments, be careful not to overextend the stretch hose when reaching. Trying to reach beyond the hose stretch capability
could cause the vacuum cleaner to tip over.
TO USE ATTACHMENTS
Remove the lower end of the stretch hose from the vacuum cleaner by grasping the hose collar, twisting and pulling straight out. The attachments can now be added to the hose.
Note: The motor protector may open when using attachments or when clean- ing new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the dust bin quickly. See the
TROUBLESHOOTING section.
The attachments will fit on the hose or
the wand. In addition, the dusting brush will also fit on the crevice tool.
The hose can be pulled off the wand by grasping the cuff and twisting while pulling up.
The attachments can be added to the hose if the item to be cleaned is not far from the vacuum cleaner.
NOTE: When vacuum cleaner is turned on,
the hose will have a tendency to collapse due to suction of the vacuum cleaner.
If more reach is needed:
Crevice Tool
CAUTION
Attachments used in dirty areas, such as under refrigerator, should not be used on other surfaces until they are washed. They could leave marks.
, WARNING
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
Wand
An extra wand, without tabs, is included. This extra wand can be added to the wand with tabs for extra reach. Insert wand and twist a quarter of a turn to secure fit.
If the dusting brush/combination brush is being used and more reach is needed, the crevice tool can be added to the wand, then the dusting brush can be added to the crevice tool.
TO STORE ATTACHMENTS
Return the hose to its position on the wand and the attachments to their holders.
9
