Review this chart to find
IbWARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
Vacuum cleaner
won'trun.
Poor job of dirt
1.Unplugged at wall outlet.
2, Tripped circuit breakedblown fuse at household service panel.
3.On/off swilch not turned on.
4.Thermal protector tripped.
1.Full or clogged dust bin.
2.Wrong pile height setting.
3.Worn agitator.
4.Clogged nozzle or dust bin port.
5.Clogged hose.
6.Hole in hose.
7.Broken/misplacedbelt.
8.Hose not inserted fully.
g.Motor protection system activated.
1.Plug in firmly,pushon/offswitchto on.
2.Reset circuit breaker or replace fuse.
3, Push on/off switch to on. 4. Reset thermal protector.
1.Clean dust bin.
2.Adjust setting.
3.Replace agitator.
4. | Check CLOG REMOVAL. |
5. | Check for clogs. |
6. | Replace hose. |
7. | Replacelfixbelt. |
8. | Insert hose fully. |
9. | Check for clogs. |
| 10. | Dirty filters. |
Vacuum cleaner picks up | 1. | Wrong pile height setting. |
moveable rugs or |
|
|
pushes too hard. |
|
|
Light won'twork. | 1. | Burned out light bulb. |
Agitator does not turn, | 1. | Brokenbelt. |
| 2. | Belt installedincorrectly. |
Air flow restricted | 1. | Attachment use restrictsair flow. |
with attachment use, | 2, | New carpet fuzz clogged air path. |
Sound changes, |
|
|
10. Clean/change filters. |
1. Adjust setting.
1.Change light bulb.
I. Replace belt.
2.Check BELT CHANGING AND
AGITATOR CLEANING.
1.Check ATTACHMENTS,
2.Check CLOG REMOVAL and clean hose.
24