Kenmore 116.36722 Agitator Assembly TO REPLACE BELT, Vacuum Cleaner Use Clean Agitator, Heavy

TO CLEAN AGITATOR

NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, the aqitator must be cleaned every time the belt is changed.

The agitator must also be cleaned accord- ing to the following schedule:

Vacuum Cleaner Use Clean Agitator

HEAVY	-	every	week
(used	daily)
MODERATE -		every	month
(used	2-3times/week)
LIGHT	-	every	2 months
(used	1 time/week)

Remove any dirt or debris in the belt path area or in the agitator area.

Agitator Assembly

TO REPLACE BELT

NOTE: See PARTS AND FEATURES for

belt number.

Loop the new belt on the motor shaft.

Loop the end of the new belt on the agitator.

Insert the agitator by placing the rounded portion of the end cap down into the slot in the nozzle base.

Motor

Shaft

Belt Groove

I

NOTE: Care must be taken due to the belt

tension during reassembly.

BELT ROUTING

Press firmly, checking to see that each end is completely inserted.

Agitator Assernbly

Check to see that the belt is centered in the belt groove. Turn the agitator with your fingers to see that it turns freely.

19