Your Kenmore Vacuum Cleaner features a two (2) speed, direct drive agitator for cIeaning a variety of floor surfaces. Please
review the tabTebelow before using your vacuum cleaner
Do not use the CARPET setting (high speed) for cleaning berber style car- pet. The high agitator speed could damage the carpet or cause excessive carpet wear
. Use the GENTLE setting (low speed) ONLY for berber or delicate pile car- peting. The agitator may slow down or stop on thick carpeting, area rugs or throw rugs. If agitator stops and does not restart, see AGITATOR MOTOR OVERLOAD PROTECTOR.
. The FLOOR setting may be used for all indoor bare floors including wood, tile, linoleum, slate etc..
|
|
| Commercial | Berber | I | I |
Touch Control | Agitator | Bare | or Delicate |
| Area | |
Settin_l | _Speed | Floor | or Low Pi!e.... | Carpet | Plush | Shag Rug |
Carpet (1) | _ High | .....................,/ | 4 | |||
Gentle (2) | Low |
| ||||
4 |
|
| L__ | ,, :,,,i,,, | ||
Floor (3) | Off |
|
| |||
,,,,,,,, ....
To select a pile height setting:
Turn off vacuum cleaner.. Select a pile
height setting by tilting the vacuum cleaner back until front wheels are lifted
slightly off the floor
Slide the adjustment lever to the correct setting.
There are four (4) pile height settings on the vacuum cleaner. Use the LOW setting for most
CAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time when the agitator is turning. Damage
to carpe,! may occur.
10
