IbWARNING
Electrical Shock Or Personal Injury Hazard
Disconnect eectrical supply before performing maintenance to the vacuum cleaner. Failure to do so
could result in electrical shock or personal injury from the vacuum cleaner suddenly starting,
TO REMOVE LIGHT BULB
1.Disconnect power cord from electrical outlet.
2.Press han- dle release
pedal and lay vacuum clean- er back.
3. Pry light lens out at slots as shown
Headlight on both sides.
Lens Rotate lens up and lift off.
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the
bulb could overheat surrounding plas- tic parts.
4.Remove the light bulb by putling straight out.
5.Carefully insert new light bulb futly into slot.
Note: See PARTS AND FEATURES for bulb number.
IAcAu,,o. !
Do not plug in or turn on until the vacu- !
um cleaner is completely reassembled, !
i NIIIIIIIIIIIIIIIIi | Ill | I |
6.To replace light lens, place tab at front of lens into slot. Rotate lens down and firmly snap into place.
2o
