Kenmore 116.36932, 116.36933 owner manual ting on the touchcontrol

Review this table to find do-it-yourself solutions for minor performance problems Any service needed, other than maintenance described in this Owner's Manual, should be performed by a Sears or other qualified service agent..

Vacuum cteaner !,

woo_t tun

2

Unplugged at wall outlet	t	Ptugin firmly,select thedesired set-
		ting on the touchcontrol
Tripped circuitbreakedblown fuse	2.	Reset circuitbreaker or replace fuse
at househotd service panel

	3_ Thermal protector ltipped		3.	At]ow		vacuum	cleaner	to cool, then
	4o Defective wall outlet		4.	reset	thermal		protector
				Check		with a good appliance/tamp.
				have	properly		serviced
	5o	Handle screwnot tight	5,	Tighten		screw
Poor job of dirt		Ful! or cloggeddust bin	f.	Empty		dust bin
plck-up,	2.	Wrong pile height setting	2.,	Adjust		settfng
	3.	Worn agitator	3	Take to your			nearest	Seam
				Service Center
	4	Clogged nozzle	4	Check		for clogs
	5.	Clogged hose	5.	Check		for clogs
	6	Hate tn hose	6.	Take to your nearest				Sears
				Service		Center:
	7.	Hose not Inserted fulty	7,	tnsert		hose fully
	8.	Motorprotectionsystem activated	8,	Check		for clogs
		(change of sound)
	9	Dirty filters	9r	Change filters.
Vacuum Cleaner picks up	t.	Wrong pile heightaetttng	1,	Adjust setting
moveabte rugs or
pushes too hard.
Light won'twork.	1,	Burned out ]$ghtbulb,	1,	Change tight bulb.
Agitator does not tarn_	1_	Handte [n full uptight positron	1.	Move handlefrom upright posilion
	2.	Agitator Overload tripped	2.	Reset Agitator Overload
	3.	Thermal protector tripped	3.	Allow vacuum cleanerto cool. then
				reset thermal protector.

Airflow restricted	f,	Attachment use restricts air ttow
with attachment use,
Sound changes,.	2.	New carpet fuzz clogged air path
Difficulty adjusting pile	1.	Vacuum cleaner not in proper upright
height setting		position
Dirt Sensor, will not work	1,	Dirty opticcells.

1.Cheek attachments for fuzz, tint, pet hair or other debris

2.Check for ctogsand cfean hose.

Place vacuumcleanertn thelocked uprightposition,tiltthe vacuumclean- er back slightly and adjustpile height

1, Clean opticcefts

22