|
| Hold dust bin | DustBin |
&WARNING | ! | over a trash | |
|
| container. |
|
Always unplug power cord from elec- | I |
trical outlet before performing any ser- | J |
vice on vacuum cleaner. | I |
TO REMOVE DUST BIN |
|
Lift dust bin handle located at the top of |
|
the dust bin,, |
|
Press the dust bin door
release button Door
downward to Release
release the Button door,
The door will
Handle
Dust - _
Bin
Pull the handle up
and lift dust bin up and out of the vac-
uum cleaner,
swing open and the debris
will fall into the
trash container_ Emptying
Door
Shake the dust bin to release any debris that might hang in the fiEterelement.
Remove any clogs that might be located in the suction port or filter port area,,
Note: See PRIMARY FILTER REMOVAL AND CLEANING section
empty of debris,
firmly close the door., Make sure
you hear a "dick" sound to indicate
_After the dust bin is that the door is fully
latched.
Door Door
Latch
TO EMPTY DUST BIN
Before removing debris from dust bin it is a good idea to move the dust bin filter clean- ing lever back and forth several times,
Moving the lever
back and forth Dust BIn_
Filter_,
loosens the dust Cleaning
and debris that Lever has attached
itself to the filter element inside the dust bin,
TO REPLACE
DUST BIN
Place dust bin back into vacuum cleaner by insertingthe bot-
tom first and tilting back with the dust bin
handle raised
Lower the dust bin handle to lock dust bin in )lace.
Rotate dust bin handle to the vertical posi- tion,,
_,noticeable "click" should be heard.
17
