4. Side Burner Valve Assembly |
(a) Remove side burner grate from side burner shelf and |
set aside. Remove the two Phillips head screws |
attaching side burner (N) to shelf to make room to install |
side burner valve. See (Fig.14) |
(b) Remove two screws from side burner control valve |
face. Insert side burner valve control stem through hole |
in side burner control panel. Place side burner control |
knob bezel (T) over side burner valve control stem. |
Secure bezel to control panel and valve with 2 screws |
removed above. (Fig. 15A1). |
(c) Insert side burner tube over side burner valve orifice |
Fig. 14
N
\ | \ | \ |
|
|
(Fig. 15B1). Use the two previously removed side burner |
screws to reattach side burner to side burner shelf. |
(d) Push control knob (U) onto valve control stem, and |
tighten use hex wrench. (Fig. 16.) |
(e) Plug ignition wire into igniter wire hanging from |
electrode on underside of burner (Fig. 17). |
(f) Replace the side burner grate into the side burner |
shelf. |
Fig. 15
T
Fig. 16
B1
/
A1
U
Fig. 17
13
