CAUTION: While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces.
Note: Be sure to slide grease tray out of back of grill head and remove all packaging from tray.
1.Use the parts list to check that all parts have been included.
2.Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box, or you have questions during the assembly process, call:
For Assembly Questions, call
1. Assembling Grill Cart
(a)Attach four casters to bottom panel (B) using (16) 1/4 x15mm Phillips head screws (AA), (16) 1/4 lock washers (FF). Note: (D)is swivel caster with brake, (E)is swivel caster, (F) are straight casters. (Fig.1)
Hint: For ease of caster assembly, turn bottom panel upside down.
(b)Attach left & right side panels (G & H) to bottom panel
(B) using (4) 5/32 x 8mm Phillips head screws (CC) with (4) 5/32 lock washers (GG). (Fig.2)
(c)Attach back panel (I) to bottom panel (B) using (3) 5/32 x 8mm Phillips head screws (CC) with (3) 5/32 washers (GG). Attach back panel (I) to side panel (G&H) using (4) 1/4 x 10mm Phillips head screws (BB) with (4)1/4 lock washers (FF). (Fig.3)
(d)Attach gas tank barrier bar (J) to back panel (I) using (1) 5/32 x 8mm Phillips head screw (CC) and (1) 5/32 lock washer (GG) from the back panel side. Attach bar to bottom panel using same size screw and lock washer. (Fig. 4)
Fig. 1
D
B
F
Fig. 2
i
/ /
H
Fig. 3
G
j'_kY'" r_
H
Fig. 4 / | , |
"\\\
\
\
\
10
