5. Grease Cup Assembly
From the back, pull out grease tray (W), remove any packaging materials from it, then insert grease cup (X) into grease tray (W) as shown in (Fig. 18). Push grease tray back into grill.
6. Installing Cooking Components
(a)Place heat diffusers over burners as shown. Diffuser ends insert into channels on front and back of firebox. (Fig. 19)
(b)Evenly space cooking grates (R) on the ledge above heat diffusers. (Fig. 19)
To obtain sear marks in cooked meat, be sure to insert grates so that side with four corner feet faces down.
(c)Insert legs of warming rack (S)into the holes in the top of firebox side panels. (Fig. 19)
7. Battery Assembly
(a)Unscrew the ignition battery cap. (Found at far left of control panel)
(b)Install battery (V) into ignition box with positive terminal facing outward.
(c)Replace the ignition battery cap after the battery has been installed. (Fig. 20)
Fig.18
W
X
Fig.19
S
R
P
Fig.20
V
14
