Kenmore 2205960 manual Door Features, Frozen food storage guide, To remove and replace the bins

Frozen food storage guide

Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture-proof), and the storage temperature. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.

Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2-3 Ib of food per cubic foot [907-1,350 g per L] of freezer space). Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room for the door to close tightly.

For more information on preparing food for freezing, check a freezer guide or reliable cookbook.

The freezer basket can be used to store bags of frozen fruits and vegetables that may slide off freezer shelves,

To remove and replace the freezer basket:

1.Remove basket by sliding it out to the stop,

2.Lift the front of the basket and slide it out the rest of the way.

3.Replace the basket by positioning it on the side wall guide rails. Lift the basket front slightly while pushing it past the guide rail stops and slide basket in the rest of the way.

DOOR FEATURES

Your model may have some or all of these features, Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Assistance or Service" section.

The door rails may be removed for easier cleaning.

Snap-on Door Rails

To remove and replace the rails:

1.Remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail,

2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown,

Drop-in Door Rails

To remove and replace the rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

To remove and replace the bins:

1.Remove the bin by lifting it up and pulling it straight out.

2.Replace the bin by sliding it in above the desired support and pushing it down until it stops.

To remove and replace the rack:

1.Remove the rack by lifting it up and pulling straight out.

2.Replace the rack by holding it above the desired support and pushing the rack back and down until it stops,

17