Kenmore 2318589 manual Accelerated Ice Production, Temperature, Adjustment, Door Ajar Alarm

Models: 2318589

1 84
Download 84 pages 10.76 Kb
Page 11
Image 11
TEMPERATURE

The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C) and 33°F to 41 °F (1°C to 5°C) for the refrigerator.

CONDITION:

 

 

TEMPERATURE

 

 

 

ADJUSTMENT:

REFRIGERATOR

too cold

 

REFRIGERATOR

- Not set correctly

for your

conditions

Control 1° higher

REFRIGERATOR

too warm

 

REFRIGERATOR

- High use or room very warm

Control 1° lower

FREEZER too cold

 

FREEZER Control

- Not set correctly

for your

conditions

1° higher

FREEZER too warm/too little ice

FREEZER Control

- High use or heavy ice use

 

1° lower

Accelerated Ice Production

The Accelerated Ice feature assists with temporary periods of heavy ice usage by increasing ice production over a 24-hour period.

Press the ACCELERICE 2touch pad to set the freezer temperature to -10°F (-23°C). The Accelerated Ice setting will remain on for 24 hours unless manually turned off. The display will continue to show your normal temperature set point.

If increased ice production is desired at all times, set the Freezer Control to a colder setting. Adjusting the freezer to a colder temperature may make some foods, such as ice cream, harder.

SmartSense TM Temperature Management

The SmartSense TM feature assists with regulating the temperature inside the refrigerator. If a large quantity of warm food is placed in the refrigerator or warm air enters the refrigerator while the door is held open, SmartSense TM activates to quickly restore the temperature to the set point.

NOTE: SmartSense TM is always on when your refrigerator is operating. You do not need to press any buttons to activate it. The LED light on the control panel indicates that the feature is functioning properly.

Control Lockout

Control Lockout disables the control touch pads to allow easy cleaning and prevent unintentional control setting changes.

.@

s&g

To disable the controls, press and hold the LOCK button for 2 seconds.

To reactivate the controls, press and hold the LOCK button for 2 seconds again.

NOTE: The lockout feature does not shut off power to the refrigerator or freezer. It simply deactivates the control panel buttons. The digital control panel display will remain lit and the buttons will beep when pressed, but no settings will be changed.

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the refrigerator or freezer door is open for 5 minutes. The alarm will repeat each minute until both doors are closed or Door Ajar Alarm is silenced or temporarily turned off.

When a door is opened, the Door Ajar Alarm feature is activated and the indicator lights up. The indicator light blinks when the alarm sounds.

NOTE: The Door Ajar Alarm feature turns off when both doors have been closed. It resets and will re-activate when either door

is opened again.

®

If alarm has not yet sounded and indicator light is on:

Press DOOR AJAR to temporarily turn the feature off. Press the button a second time to re-activate the feature.

If alarm is sounding and indicator light is blinking:

Press DOOR AJAR to silence the alarm. The indicator will stop blinking and remain on. If the door remains open for another 5 minutes, the alarm will sound again.

To temporarily turn the feature off, press DOOR AJAR a second time before 5 minutes have passed. Once it is off, Door Ajar Alarm can be re-activated at any time by pressing DOOR AJAR again.

Depending on your model, your water and ice dispensers may have one or more of the following features: a rotating water dispenser faucet and pull-out tray, a special light that turns on when you use the dispenser, a lock option to avoid unintentional dispensing, or an indicator that tells you when there has been a power outage.

NOTES:

The dispensing system will not operate when the freezer door is open.

After connecting the refrigerator to a water source, flush the water system by dispensing water into a sturdy container until you draw and discard 1.5 gal. (5.4 L) of water, or for approximately 3 minutes after the water begins dispensing. The flushing process cleans the water system and clears air from the lines. As the air is cleared from the lines, water may spurt out of the dispenser.

Allow 24 hours for the refrigerator to cool down and chill water.

Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

11

Page 11
Image 11
Kenmore 2318589 manual Accelerated Ice Production, Adjustment, SmartSense TM Temperature Management, Door Ajar Alarm