Kenmore 318205342A manual Setting Continuous Bake or 12 Hour Energy Saving, Setting Kitchen Timer

Setting the Clock

Setting Continuous Bake or 12 Hour Energy Saving

The and pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

Instructions	PRESS	DISPLAY
To set the control for Continuous Bake or 12 Hour Energy
Saving features

1. Press and hold for 7 seconds (Fig. 1). After 10 seconds "12Hr for 7 seconds OFF" or "STAY On" will appear in the display and the control will

beep once (Fig 2 or 3).

2. Press to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12Hr OFF" (Fig. 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "STAY On" indicates the control is set for the Continuous Bake feature (Fig. 3).

3. Press to accept the change (Fig. 4; display will return to time or

of day) or press to reject the change.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Setting Kitchen Timer

The pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions, except during a self-clean operation. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.

			Instructions		PRESS	DISPLAY
To set the Kitchen Timer (example: 5 minutes)
1.	Press	(Fig. 5).
2.	Press the number pads to set the desired time in the display
						Fig. 5
	(example 5). Press		. The time will begin to count down in the		5
	display (Fig. 6). Note: If			is not pressed the timer will return to
	the time of day after 30 seconds.					Fig. 6
3.	When the set time has run out, "End" and "TIMER" will show in
	the display (Fig. 7). The clock will sound with 3 beeps every 7
	seconds until		is pressed.
						Fig. 7

To cancel the Kitchen Timer before the set time has run out

Press . The display will return to the time of day.

To Set Add 1 Minute Feature

The pad is used to set the Add 1 Minute feature. When the pad is pressed, 1 minute is added to the Minute Timer

feature if this feature is already active. If the Minute Timer feature is not active and the pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.

9