Togetthemaximumcleaningand fabriccarefromyourwasher,please

readand follow these instructions.

NOTE: The drawings in this section show the basic features of all models

covered by this manual. Refer to the supplied "Feature Sheet" for your washer's particular features.

Explosion Hazard Never place items in the washer

that are dampened with gasoline

or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including

cooking oils).

Failure to follow these instructions

can result in death, explosion, or fire.

STARTING YOUR WASHER

STEP 1. Add measured detergent directly into washer basket. Then place a load of sorted clothes in the washer.

STEP 2. (OPTIONAL STEP) If desired, add measured liquid chlorine bleach to the liquid bleach dispenser (see page 26).

STEP 3. (OPTIONAL STEP) If desired, add measured liquid fabric softener to

the fabric softener dispenser (see page 27).

STEP 4. Close washer lid.

STEP 5. Set WATER LEVEL ControlQ based on the size of your wash load (see page 21 ).

STEP 6. Set the WATER TEMPERATURE Control Q (see pages 21 and 22).

STEP 7. Set RINSE OPTIONS Control (see page 24).

STEP 8. Set SPEEDS _)Control according to the type of fabric in the load (see page 22).

STEP 9. Push the Cycle Selector Control (Timer) Knob Q in and turn to

the right to desired setting (see page 23).

STEP 10. Pull the Cycle Selector Control (Timer) Knob out. The dial will rotate as the

cycle progresses. The knob will not rotate.

STOPPING/RESTARTING

YOURWASHER

To stop the washer at any time, push the Cycle Selector Control (Timer) Knob in.

Pull the knob out to restart.

2O

Page 20
Image 20
Kenmore 3950144 owner manual Starting Your Washer, STOPPING/RESTARTING Yourwasher